What is the default maximum reservable bandwidth (percentage) by any single flow on an interface after enabling RSVP?
A. 75 percent
B. 60 percent
C. 56 percent
D. 50 percent
E. 25 percent
Which two protocols can have their headers compressed through MQC? (Choose two.)
You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network. It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also, if the local OSPF route goes away, the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path?
A. static route needs to be added
B. floating static route needs to be added
C. bgp backdoor command
D. ospf backdoor command
In BGP routing, what does the rule of synchronization mean?
A. A BGP router can only advertise an EBGP learned route, provided that the route is an IGP route in the routing table.
B. A BGP router can only advertise an IBGP learned route, provided that the route is an IGP route in the routing table.
C. A BGP router can only advertise an IBGP learned route, provided that the route is an IGP route that is not in the routing table.
D. A BGP router can only advertise an EBGP learned route, provided that the route is a metric of 0 in the BGP table.
Router 1 is configured for BGP as dual-homed on the Cisco network. Which three BGP attributes are carried in every BGP update on this router (both IBGP and EBGP)? (Choose three.)
In your Cisco EIGRP network, you notice that the neighbor relationship between two of your routers was recently restarted. Which two of these choices could have made this occur? (Choose two.)
A. An update packet with init flag set from a known, already established neighbor relationship was received by one of the routers.
B. The ARP cache was cleared.
C. The counters were cleared.
D. The IP EIGRP neighbor relationship was cleared manually.
Your Cisco network currently runs OSPF and you have a need to policy-route some specific traffic, regardless of what the routing table shows. Which one of these options would enable you to policy-route the traffic?
A. source IP address and the protocol (such as SSL, HTTPS, SSH)
B. the packet Time to Live and the source IP address
C. type of service header and DSCP value
D. destination IP address
You use OSPF as your network routing protocol. You use the command show ip route and you see several routes described as O, O IA, O E1, and O E2. What routes are in your area?
A. O IA
B. O E1
C. O E2
What are the mandatory, well-known BGP attributes?
A. origin, AS-path, next-hop
B. AS-path, origin, MED
C. AS-path, origin, weight
D. AS-path, weight, MED
Network A has a spanning-tree problem in which the traffic is selecting a longer path. How is the path cost calculated?
A. number of hops
B. priority of the bridge
C. interface bandwidth
D. interface delay
E. None of the above
Passleader 350-001 Braindumps Help You Pass Exam With 100% Money Back